RSS Notification

NCP1392  NCP1393  :  Self-Oscillating 600 V Half-Bridge Drivers with Brown-out Input

• Adjustable operating frequency from 25 to 250 kHz with a single resistor
• Adjustable brown-out protection ensures correct bulk voltage operating range; fixed dead time helps prevent shoot through current
• NCP1392B features an autorecovery enable input; NCP1393B features a latched input for severe fault conditions

ADP4000  ADP4100  :  6-Phase VR11.1 Controllers for Desktops and Servers

• Can be programmed for 1- through 6-phase operation; construct up to six complementary buck switching stages; 7.0 x 7.0 mm LFCSP-48
• Power state indicator can be used to reduce number of operating phases at light loads
• ADP4000 includes a PMBus interface to to program system set points and monitor key system performance data

NCP1080  NCP1081  NCP1082  NCP1083  :  Integrated PoE-PD and DC-DC Converter Controllers

• Integrated solution for medium and high power Ethernet applications; NCP1080/1 PoE eliminates local power supplies/adapters, NCP1082/3 supports PoE and auxiliary sources
• Robust devices with superior ESD protection and excellent thermal characteristics; all are pin compatible in exposed pad TSSOP-20
• NCP1080/2 deliver up to 13 W for traditional IEEE 802.3af PoE apps; NCP1081/3 deliver 25 W per draft IEEE 802.3at (D3.0) and up to 40 W for proprietary high power PoE apps

NCP3064  NCV3064  :  1.5 A, Step-Up/Down/Inverting Switching Regulator w/Enable

• 150 kHz upgrade to the popular MC33063A/MC34063A, designed for boost, buck and inverting converters with minimal external components
• Improved protection features: thermal shutdown protection, cycle-by-cycle current limit
• ON/OFF feature puts the device into a standby state (<100 uA); NCV3064 meets automotive requirements

AMIS-30511  AMIS-30512  :  Micro-Stepping Stepper Motor Controllers/Drivers

• Drives 2-phase bipolar stepper motors with 400 mA continuous and 800 mA maximum current; for higher current, see AMIS-30521 and AMIS-30522 (up to 1.6 A maximum current)
• Speed and load angle (SLA) pin allows the development of algorithms for sensorless stall and step-loss detection plus in-situ system characterization
• AMIS-30512 includes 5.0 V regulator, watchdog reset and SPI interface to obtain error registers which report temperature, open/short motor coil, and other warning states when alerted by the error pin

NCP1392  NCP1393  :  Self-Oscillating 600 V Half-Bridge Drivers with Brown-out Input

• Adjustable operating frequency from 25 to 250 kHz with a single resistor
• Adjustable brown-out protection ensures correct bulk voltage operating range; fixed dead time helps prevent shoot through current
• NCP1392B features an autorecovery enable input; NCP1393B features a latched input for severe fault conditions

NTLJS1102P  :  8.0 V P-Channel Power MOSFET

• Optimized for high side load switching and load management applications in portable equipment
• RDS(on) rated at 1.2 V logic level gate drive; high efficiency for minimal battery drain
• 2 x 2 x 0.8 mm WDFN-6 package with exposed drain pad yields excellent thermal performance

NCP2991G  :  1.3 Watt Class AB Audio Power Amplifier

• Best-in-class PSRR -100 dB rejects TDMA noise and other fluctuations from power supply
• Zero pop-noise with single ended or differential audio input
• Very fast turn-on time, select either 15 or 30 milliseconds

NCS6433  :  Wide Bandwidth, Bidirectional 4-Channel 2:1 Video Switch

• Switches video signals such as RGB, composite, S-Video and component video (YPbPr)
• Single switch-enabled input (low = A port is connected to B port; high = high impedance between the A and B ports)
• Low crosstalk, low on resistance and fast switching times make it suitable for high frequency video applications in high definition LCD TVs

NZ9F2V4  NZ9F2V4S  NZ9F5V1  NZ9F5V1S  NZ9F24V  :  200 mW Zener Voltage Regulator Series

• 47 devices with breakdown voltages from 2.4 V to 24 V
• Available with ±5.0% tolerance; S versions are ±2.0% tolerance
• 1.0 x 0.6 x 0.4 mm SOD923 is ideal for cell phones and other space constrained applications

AMIS-49200  :  Fieldbus® Physical Layer Medium Access Unit (MAU) Transceiver

• For low speed FOUNDATION Fieldbus® and Profibus® PA instruments and devices; enables the fieldbus to completely power field devices using the integrated power supply block
• AMIS-49200 is a drop-in replacement for the Yokogawa µSAA22Q MAU, packaged in a 10 x 10 mm LQFP-44; AMIS-49250 is ideal for new, small form-factor designs (7.0 x 7.0 mm NQFP-44 package)
• Data rate of 31.25 kbps voltage mode; dual voltage supply 3.0 - 6.2 V; 500 uA (typ) current consumption

NCP1080  NCP1081  NCP1082  NCP1083  :  Integrated PoE-PD and DC-DC Converter Controllers

• Integrated solution for medium and high power Ethernet applications; NCP1080/1 PoE eliminates local power supplies/adapters, NCP1082/3 supports PoE and auxiliary sources
• Robust devices with superior ESD protection and excellent thermal characteristics; all are pin compatible in exposed pad TSSOP-20
• NCP1080/2 deliver up to 13 W for traditional IEEE 802.3af PoE apps; NCP1081/3 deliver 25 W per draft IEEE 802.3at (D3.0) and up to 40 W for proprietary high power PoE apps

NB3N3020  :  3.3 V LVPECL/LVCMOS Programmable Clock Multiplier

• Premier member of a new programmable clock family, featuring 26 customizable clock multipliers for design flexibility and reduced system cost
• Period jitter of only 5.0 psec expands system timing margin, yields higher reliability and enables higher frequency designs
• Wide output frequency range from 8.0 to 210 MHz; takes a 5.0-27 MHz crystal or 2.0-210 MHz LVCMOS single-ended clock source and generates a differential LVPECL output and a single ended LVCMOS output